Top 6 Best Fuel Injector Cleaners to buy in 2017

best fuel injector cleaners intake valve dirty and clean

Intake valve in the engine before and after use of injector cleaner

What are the best fuel injector cleaners in 2017?


PictureProductQualityPrice
liqui-molyLiqui Moly Jectron Fuel System Cleaner4.8/5$$
10013-lucas-oil-fuel-treatment10013 Lucas Oil Fuel Treatment 4.7/5$
bg-44k-fuel-system-cleanerBG 44K Fuel System Cleaner4.5/5$$$
red-line-si-1Red Line SI-14.5/5$

royal-purple-max-clean-fuel-system-cleaner
Royal Purple Max-Clean Fuel System Cleaner4.5/5$$
chevron-techron-concentrate-plus-fuel-system-cleanerChevron Techron Concentrate Plus Fuel System Cleaner4.5/5$

Today’s cars generally have internal combustion engines (ICE). Combustion occurs in the cylinders that are inside your engine. The way engines work is an extremely complex story. In short, the fuel injector injects gasoline under great pressure into the cylinders. In essence, the fuel injector is valve that leaks a certain amount of fuel in the motors of vehicles. Fuel injection atomizes the fuel due to a tiny squirt under high pressure. A controlled explosion then occurs in the cylinders, which is used to propel the vehicle. However, over time, this process creates impurities. This grime creates more problems.The first and most important is that it reduces the power of the engine. Another, even bigger problem is the reduced fuel economy. The third problem of a dirty fuel injector is releasing harmful gases. To prevent such a problem, it is necessary to clean the fuel injector. Therefore becomes a very important answer to the question: How to choose best fuel injector cleaners ?

How do I know that my fuel injectors need cleaning?

The best sign is that your engine does not react in the right way after pressing the gas pedal. Also, if you feel that your engine no longer has the same strength as before, you should also clean the fuel injector.

There are also a number of other minor symptoms which indicate that your fuel injector is dirty: poor idle, hot / cold starting issues, engine knock or detonation, deceased acceleration, and increased fuel consumption all may refer you to a possible cause.

How often should I clean the fuel injector?

The answer to this question depends on many factors. It would be best to clean it every 15,000 to 20,000 miles traveled. If you drive an older car, it should be cleaned more frequently, for every 10,000 miles traveled. The car engines that use fuel with lower octane grades are very susceptible to soiling. For example, a vehicle in which the owners pour 87 octane fuel will likely accumulate dirt into the engine.

Why you should use fuel injector cleaners?

The first and most important reason is because of the ease of use. There is no need to drive the car to the garage to take apart and clean the engine parts. Another reason is the much lower price of cleaning. Usage of injector cleaners is simple: you just need to add this liquid to the fuel. Sometimes this process must be repeated several times. In any case, you do not have to pay money for repair and you don’t need to have a lot of technical knowledge for this.

You’re probably wondering, what does fuel injector cleaner consist of? The answer is simple: it is a mixture of detergents that effectively break down and clean all deposits that accumulate in the engine. Your entire job will be to pour the contents into the tank and continue to drive your car.

Currently, there are dozens of fuel injector cleaners on the market. After careful performance testing and based on the experience of a lot of users, we have compiled a list of the best cleaners.

 

Liqui Moly Jectron Fuel System Cleaner

This is the best-rated cleaner by consumers. Jetron have been rated 4.8 out of 5 stars by more than 300 satisfied customers. In the opinion of a large number of consumers, this product is best fuel system cleaner. Liqui Moly is one of the most serious European manufacturers of fuel additives. The German government has marked this additive as one of the safest to use on German roads. It was tested on a variety of vehicles and supposedly gave the best results in the stronger German cars. This product does not contain polyether amines (PEA) because it is naphtha based. Otherwise, this product is used only for gasoline engines. For diesel engines, there is a special Liqui Moly product. It is easy to use –just pour a bottle of Liqui Moly into a half-full fuel tank. The results can be seen very quickly. Your engine will show a significant increase in strength and agility. How often you use Jetron System cleaner depends on the type of your vehicle, as well as the use of the car. Many owners have introduced a rule to use Liqui Moly once every three months. Of course, how often you use it depends on you. The price of this injector cleaner is much lower than the others. You can especially save if you make bulk purchases on Amazon.  For example, one 300 ml bottle can be purchased for the price of $8 to $11.  If you buy a pack of 6 bottles, you can save more than $10.

10013 Lucas Oil Fuel Treatment

This product has an extremely high score of up to 4.7 out of 5 stars. A second important fact is that this is a USA made product. What’s amazing is that you get a whole gallon for a few dollars. In fact, when you use it, just pour 3 ounces of Lucas Oil Fuel Treatment in 10 gallons of fuel. After that you can travel as much as 10,000 miles without any additives. Your injector will be thoroughly cleaned. This product works, and much more. Namely, it contains oils which will coat the walls of the combustion chamber. This thin layer protect from damage and from potential new depositions. This product solves the problem with fuels that have low sulfur content. There are numerous reports from users who say that the sound of their engine was much quieter after use of this product. Also, many users have reported a significantly improved mpg – in some cases, more than 2 mpg, which is a big saving. If you get a “check engine” warning on your dashboard, you can try to solve it with this add-on. Many were able to solve this problem by simply pouring Lucas Oil 100013 in a half-empty tank and riding a few dozen miles. When you consider the cost of this product, you will see that it is the most cost-effective of all the additives.

Red Line SI-1

SI-1 is a product of the famous Red Line company, which has existed since 1979. The company’s headquarters is in California. SI-1 will clean all parts of the engine extremely easily: valves, fuel injectors, carburetors, combustion chambers. The Red Line’s secret to success is in a high concentration of a substance called PEA (polyether amines). This product is sufficient for thorough cleaning, even for vehicles that have a very dirty injector.  Use is simple – just pour a complete bottle in the empty tank and then fill the rest of tank with fuel. According to the recommendations, you can drive safely for the next 3,000 miles, and then you can re-pour Red Line. Other sources recommend using it every 6 months. Of course, you will make your own decision about using this additive. The major factor in this decision is how often you drive your automobile.  This product is excellent for all types of gasoline engines. Of course, if you have a diesel or LPG engine, you should use a different product.

Royal Purple Max-Clean Fuel System Cleaner and Stabilizer

This product has a very good grade – 4.5 out of 5. Royal Purple is another great American product. When this product first appeared, it was a pleasant surprise. In fact, this product is known according to its ability that suits to the vast majority of engines on the market. So, it is a product with the highest ability to use. It is used on new vehicles, as well as on vehicles that already have a problem with accumulated dirt in the fuel system. This fuel system cleaner significantly enhances fuel economy. According to some sources, Royal Purple improves mpg over 3%. It is used so that the whole bottle is poured into a full tank. After that, you will not have any problems with your fuel injector for the next 10,000 miles. It is recommended to add a Royal Purple injector cleaner every time you change the oil. This product is also known to cause a significant reduction in emissions. It reduces emissions of: nitrous oxide, hydrocarbons and carbon emissions.

BG 44K Fuel System Cleaner

BG is a company that has been known for its excellent additives for vehicles for more than 4 decades. This time, we pay attention to the 44K Fuel System Cleaner. It is a clean product with probably the strongest effect on dirt. However, the price of the asset is high when you take into account that the 325 ml (11.2 ounces) cans cost about $20 each. One can is enough for 20 gallons of gasoline. You need to do the following treatment with this product after every 5000 miles. Many companies recommend their dealers to exclusively use BG 44K. Also, many users have used only this cleaner fuel injector for decades. This product is great and hundreds of customers evaluated it with 4.5 stars. BG44K is one of the best fuel Injector cleaners in the market.

fuel-injector-before-and-after-use-of-cleaner

Chevron Techron Concentrate Plus Fuel System Cleaner

This is, by far, the cheapest product on our list. The price for 20 ounces of this Fuel System Cleaner is less than $ 8. In addition to the extremely cheap price, this product is well estimated with grade of 4.5 from over 700 users. Extremely fast clean all parts of the engine. Chevron made an effort to make a product that will effectively remove all the impurities caused by exploitation of the engine. Effectively cleans carbon deposits. Extremely reliable means that you will promptly regain strength engine, reduce and eliminate rough idle and will restore acceleration and fuel economy. From all the other injector cleaners from this list, this product is distinguished by its availability, because it can be purchased on every Chevron gas station. Another very positive aspect of this product is the lowest price.

Comments are closed.